Heat Pump Maintenance

If you’re looking for a way to save money on your heating and cooling bills, then it’s time to learn about the importance of Heat Pump Maintenance. Heat pumps are used in many homes across America because they make energy efficient. If you want them to last longer and keep working at their best, read these tips! 

Heat pumps use less energy when compared with other heating systems like natural gas or electric furnaces. They also provide more comfort than radiant heaters. They emit air uniformly throughout the room instead of just under one area. But if you don’t maintain your heat pump, it can have some major consequences. It can include using up too much electricity, making noise that disturbs neighbors, or leaking refrigerant, which is bad for the environment. So keep reading if you want to keep it running for years!

Why Is It Important to Have Your Heat Pump Regularly Maintained?

A dirty and poorly running air conditioner can be a huge drain on your energy bills. No matter whether you own a gas furnace or electric heat pump. Just like with regular car maintenance, regular heating and cooling system care helps make sure that the work your air conditioner or heat pump does is as efficient as possible and doesn’t cause extra wear and tear on itself.

A clean filter, proper refrigerant charge, and high-efficiency motor can save you hundreds of dollars in wasted energy costs each year by keeping your equipment running at peak performance levels. Maintaining your HVAC professional ensures that repairs are caught early before they become major issues with your unit. Combine this with regularly scheduled servicing by a professional, and you are saving not only money but helping to reduce your impact on the environment.

Professional Tips for the Maintenance of Your Heat Pump

Be Protective:

Never use water to clean the outside of your heat pump. Water can cause serious problems if it leaks into areas that aren’t supposed to get wet, like the compressor and electrical boards.

Make sure you cover all floor holes and outdoor components such as filters, coils, drains, and condensate pumps. This keeps out debris, including leaves, lawn clippings, and small animals. Heat pumps work by pushing warm air through your home or building; if these openings are blocked off with objects, any of them could back up and prevent proper function.

Professional HVAC technicians recommend wrapping filter frames in foil before replacing the filter so that insects cannot fly into or burrow into it. They should also be checked regularly to ensure that they don’t rust over and become less disposable. If you live in an area with weather below 32 degrees Fahrenheit, you may want to consider investing in a heat pump cover for your unit.

Remove All the Snow:

Snow can pile up around your heat pump and block the secondary lines. When this happens, the primary line will operate at 100 percent capacity while the second line is operating at half its capacity. This means that you are not getting the maximum efficiency out of your heat pump and could be wasting money.

Keep an eye on all of these areas to make sure they don’t become a problem and maintain the proper function of your heating and cooling system for years to come.

Use the Right Equipment:

Use the right equipment on your heat pump, like covers or de-icing cables that fit properly. You may also want to consider insulation. Improper setup could be preventing your heat pump from operating at 100 percent capacity and costing you money!

During Operation:

Check the suction line filter regularly for dirt accumulation. A blocked filter can reduce airflow, which will decrease efficiency and cost you more money. The same goes for your condensate pan; make sure it drains properly and doesn’t overflow onto your unit. If water is accumulating near your unit, clear it away to prevent corrosion of pipes leading to the outdoor coil, which would lead to mold growth within the system. This could also increase efficiency by preventing the waste of energy needed to remove the extra moisture.

Make sure your thermostat is not in Forced Cool mode, which can cause compressor failure. If you have a room thermostat, make sure it is set to Heat and not Cooling.

During Start-Up:

After allowing time for your unit to cool off (between two and four hours), rotate the fan blade clockwise by hand (or turn on oscillation function) to ensure that all areas of the coil fins are wet and collect condensation. This ensures optimum cooling efficiency while minimizing surge currents during start-up. Failure to do this can result in unnecessary stress on your compressor, severe damage, or even fire! Once complete, place the system back into an Auto mode so the unit will cycle appropriately according to the set point.

If you have a heat pump that is working properly, then this article does not apply to your system. You can go on to read about how much it costs to fix a heat pump. But if you do have a heat pump with any problems, please take care of them ASAP! The longer you wait, the more expensive they become and the greater risk there is for fire or severe damage.

Conclusion:

By following the tips mentioned above, people will be able to enhance the life of their Heating / Cooling unit/equipment by making simple changes in their routine maintenance activities such as checking air filters regularly, cleaning coils, removing debris from outside vents, etc. which will help in improving the efficiency of Heating / Cooling units and thus prevent them from major repairs.

In this article, I have guided you on how to maintain a Heating / Cooling unit/equipment so that you can prolong its life and save money. Please follow these tips for the betterment of your indoor environment.

If you are looking to install a new Heating / Cooling system or need any repairs, Call Le High HVAC. They provide the best HVAC service in the country! Thanks for reading!

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.